SEW EF-014-503 伺服驱动器 库存现货

注；本站所有产品均为特殊产品，市场价格一直波动，具体以客服报价为准，因产品为全新产品，图片并非实拍，下单前请跟客服确认型号和产品，价格等详细信息，网站内二手，全新均有销售，具体请联系客服沟通。
 

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
我们会让时间证明，您的选择没有错！ 我们会用诚心的服务换取您200%的满意
高品质低价格 现货提供 您的满意是我们为之努力的目标
第壹次合作客户,订货前可提供资质及近销售开出的票据扫描件以供查询。
售后问题：按照品牌所属生产厂家标准执行，保证售后服务，所有产品一年质保等
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
全新现货，库存充足
质保一年，竭诚售后

本公司专注于DCS、PLC、机器人、大型伺服四大系统领域
主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器
公司优势：供应进口原装正品，专业停产配件
发货快，货期精准，一手货源，现货库存超过1亿
以下是我司【主营产品】，有需要可以发来帮您对比下价格哦！

购买咨询热线：15339537795（微信同号）

QQ：342289566

联系人：袁小姐

邮箱：342289566@qq.com

公司：贵州源妙自动化设备有限公司

地址：贵州省安顺市西秀区北街街道虹山湖路42号虹山大酒店(百灵.希尔顿逸林酒店 )幢14层9号

The Programmable Logic Controller (PLC) first appeared in the United States in the late 1960s. It was called PLC (Programmable Logic Controller) at that time and was designed to replace relays. To perform logical judgment, timing, counting and other sequential control functions. The concept of PLC was put forward by General Motors Corporation. PLC basic design idea is the computer function perfect, flexible, general advantages and relay control system simple, easy to understand, easy to operate, cheap advantages together, controller hardware is standard, general use. According to the actual application object, the control content is programmed into the user program memory of the controller to make the connection between the controller and the controlled object convenient.

2.3 PLC features and functions

(1) the main characteristics of PLC. PLC is characterized by reliable work, fast running speed, building block structure, flexible combination, good compatibility, simple programming and generation, rich, strong network function.

(2) the main functions of PLC. PLC system can complete the industrial real-time sequence control, condition control, counting control, step control and other functions; Capable of modular/digital (A/D), digital/modular (D/A) conversion, data processing, communication networking, real-time monitoring and other functions. Years of practice shows that PLC, reliable, is specially designed for the factory, with according to the requirements of the working environment reinforcement components, real-time scanning practice and fault diagnosis function, simple troubleshooting, deep preference of users. What makes a PLC so reliable is a real-time core or operating system of executable relay logic, sequential function diagrams, function blocks, structural text, command directories, or a combination of them. In the event of failure, the built-in device can maintain mechanical damage, and can maintain an orderly, predictable sequence.

2.4 PLC development trend: very fast logic operation and logic control, sequence control ability, in the discrete control of some reliability, convenient and easy to learn the programming method, so that it has an indisputable position in the discrete industrial automation field.

ControlNet通讯模块
（新项目推荐采用以太网架构，C网架构会逐渐退出市场舞台）

◆ 大128个CIP连接

◆ 至少使用4个网络节点

◆ 小节点地址分配给远程模块，做为激活的保持器Keeper。

◆ 冗余机架上的ControlNet模块设置相同节点地址，同步以后从站地址会自动加1，要为从站预留连续地址

◆ 支持冗余介质

电源系统特点

◆ 宽输入电压范围

● 整流模块输入电压为120~290V (新的设备达到90 ~290V )

◆ 高功率因素，高效率

● 功率因素达99%，效率达88%

◆ 采用无损热插拔技术，维护简便(小改进解决大问题)

◆ 网络化设计，实现无人职守和远程监控(多种后台监控)

◆ 电池管理功能先进(智能全方位管理)

● 温度补偿

● 负载下电(LLVD)和电池低电压保护(BLVD)

● 充电电流限制、定时均衡充电

● 电池容量计算、在线电池测试

系统原理

◆ 交流电经交流配电分路进入整流部分;各整流模块整流得到的+24V直流电通过汇接进入直流配电，分多路提供给通信设备使用。

◆ 正常情况下，系统运行在并联浮充状态，即整流模块、负载、蓄电池并联工作，整流模块除了给通信设备供电外，还为蓄电池提供浮充电流。

◆ 当市电断电时， 整流模块停止工作，由蓄电池给设备供电维持设备的正常工作。

◆ 市电恢复后，整流模块重新给设备供电，并对蓄电池进行充电，补充消耗的电量。

◆ 监控模块采用集中监控的方式对交流配电、直流配电进行管理，同时通过RS485接口接收整流模块的运行信息并进行相应的控制。

◆ 监控模块还可通过RS485、RS232 方式连接本地计算机，并可通过Modem或其它传输资源(如公务信道等)联结监控中心，实现电源系统的集中监控组网。

冗余系统配置
（1）：安装软件

◆ 安装RSLogix5000/Studio5000软件，注意版本，RSLinx Classic软件会自动安装。

◆ 如果采用ControlNet架构，安装RSNetWorx for ControlNet软件。

◆ 安装冗余固件包，ControlFlash V14以上或者ControlFlash Plus工具

◆ 安装冗余配置工具RMCT

（2）：安装硬件

◆ 将电源模块、处理器、通讯模块和冗余模块安装到机架中。

◆ 两个机架中，相同模块的槽位要一致，建议冗余模块靠近处理器放置。

◆ ControlNet通讯模块节点通过拨码设置。

◆ 冗余模块光纤连接，光口没有顺序要求。

◆ 为电源模块连接电源。

（3）：与电脑建立连接

◆ 分别为2个机架上电。

◆ 使用USB电缆将处理器和电脑连接，在RSLinx Classic中可以看到机架和机架上的所有模块。

◆ 在RSLinx Classic中为以太网模块设置IP地址，改为静态。

◆ 也可以使用BootP-DHCP工具直接为以太网模块设置IP地址。

◆ 对应的以太网模块的IP地址、子网掩码、网关要一致。

◆ 在RSLinx Classic中建立Ethernet/IP驱动，可以通过以太网看到机架和机架上的所有模块。

（4）：固件刷新

◆ 使用ControlFlash或ControlFlash Plus工具分别刷新机架中的模块。

◆ 需要刷新的版本依据固件包的Release notes。

◆ 2个机架分别上电刷。

◆ 处理器钥匙开关位于REM档。

（5）：网络配置以太网Ethernet/IP

◆ 星型拓扑，以太网模块要连接到交换机。

◆ 环型拓扑，设置环网管理者，连接所有DLR环网节点，在RSLinx Classic中查看环网状态。

◆ RSLinx Classic里设置以太网路由

（6）：冗余模块配置

◆ 基本使用不需要配置冗余模块。

◆ 建议使用RMCT设置冗余模块时间。

交流电源模块描述

概述

交流电源模块可以有选择地安装在 S-Panel PC 上，以便 S-Panel PC 在 100...240 Vac下运行。

交流电源

下表提供交流电源模块的技术数据：

接线和连接端子块

如何连接交流电源模块：

1、切断 S-Panel PC 的所有电源，并确保电源适配器与其电源处是断开的。

2、交流电源模块用 4 个螺钉安装至 S-Panel PC：

3、从电源连接器移除端子块，然后将电源线连接到端子块：连接端子块上带 0 V 电压的黑色导线和带 24 V 电压的红色导线。使用 2.5 平方毫米铜质导线进行端子块的接地连接。

4、将端子块放入电源连接器中，然后拧紧螺钉：

5、连接电源线并拧紧螺钉：

Characteristics of servo motor

Dc brushless servo motor features

Small moment of inertia, low starting voltage, small no-load current; Abandon contact type reversing system, greatly improve the motor speed, high speed up to 100 000rpm; Brushless servo motor in the implementation of servo control, without encoder can also achieve speed, position, torque control; There is no wear of the brush, in addition to high speed, but also has a long life, low noise, no electromagnetic interference and other characteristics.

Dc brush servo motor features

1. Small size, quick action, quick response, large overload capacity, wide speed range

2. Low speed torque, small fluctuation, smooth operation

3. Low noise, high efficiency

4. The back-end encoder feedback (optional) constitutes DC servo and other advantages

5. Large range of variable voltage, adjustable frequency

The advantages of servo motor

First of all, let's take a look at the servo motor and other motors (such as stepper motor) compared with what the advantages of:

1. Precision: the closed-loop control of position, speed and torque is realized; The problem of stepping motor out of step is overcome.

2, speed: high speed performance, the general rated speed can reach 2000 ~ 3000 revolutions;

3, adaptability: strong anti-overload ability, can withstand three times the rated torque load, especially suitable for instantaneous load fluctuation and requirements of fast starting;

4, stability: low speed running smoothly, low speed running will not produce similar to the stepper motor stepper operation phenomenon. Suitable for high speed response requirements;

5, timeliness: motor acceleration and deceleration dynamic corresponding time is short, generally within tens of milliseconds;

6, comfort: heat and noise significantly reduced.

To put it simply: usually see the kind of ordinary motor, after the power cut it will turn for a while because of its own inertia, and then stop. And the servo motor and stepper motor is to stop, say to go, the reaction is very fast. But the stepping motor is out of step.

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，

  以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出模块，

冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块。